RuneScape Dragonwilds Bronze: ⚒️ Fast Gear Guide ⚔️

8 min

Your first set of metal gear changes everything in the early hours of a survival game. In RuneScape: Dragonwilds, that first upgrade is bronze, and it is easier to reach than most players expect.

This guide covers RuneScape Dragonwilds Bronze from the first ore swing to a full armor set. You will also see where most new players waste time and how to avoid it.

Here is the short answer. To get bronze in RuneScape Dragonwilds, mine copper and tin, build a furnace in an open area, and smelt equal amounts of both ores into bars. Then take those bars to a bench and craft your weapons and armor.

RuneScape Dragonwilds Bronze

RuneScape Dragonwilds Bronze: What You Need To Know First

Before you swing a pickaxe, it helps to understand how the early crafting chain fits together. Bronze sits right after your basic wooden and stone tools.

Everything else in the early game depends on it, so a clean start saves hours.

What Is Bronze In Dragonwilds?

Bronze is a copper and tin alloy. In practice, it is the first real metal tier, and it unlocks sturdier weapons, helmets, shields and body armor.

It also feeds into building pieces such as benches, so it is more than a combat upgrade.

What You Need Before You Start

Gather the following before you leave your base:

  • A pickaxe able to mine copper and tin rocks
  • Stone, clay and charcoal for the furnace
  • Some inventory space, since ore and bars are heavy
  • A safe route back to base, because early monsters hit hard

Furthermore, the furnace recipe unlocks once you carry tin or copper ore, so mining comes first.

Bronze Bar RuneScape Dragonwilds: The Full Recipe

The Bronze Bar RuneScape Dragonwilds recipe is simple on paper. The community wiki lists 3 copper ore and 3 tin ore smelted at a furnace, which yields 2 bars per batch.

The wiki also lists a low Artisan level requirement, so you can start almost immediately. Values can change between updates, so double check in game.

Ore And Furnace Requirements

Item What It Needs Notes

 

Furnace Construction level 12, stone, clay, charcoal, runes and shards Must sit in an open area with no roof
Bronze Bar 3 Copper Ore + 3 Tin Ore Yields 2 bars per batch
Alternative Bar 9 Bronze Salvage Yields 1 bar
Armor Bench Bronze bars plus extra crafting materials Used to craft armor pieces

How To Smelt Bronze Bars Step By Step

  1. Mine at least 3 copper ore and 3 tin ore.
  2. Build a furnace in an area without a roof.
  3. Add charcoal as fuel so the furnace can run.
  4. Select the Bronze Bar recipe and smelt the ores.
  5. Collect the bars and carry them to your crafting bench.

As a result, one trip with a full stack of ore can supply a complete early kit.

Where Can You Find Copper And Tin?

Copper and tin rocks appear in the early regions, usually near your starting area. Look for rocks with colored veins and use the map to mark good clusters.

Notably, ore nodes respawn, so a productive spot is worth returning to.

How To Make Bronze Armor RuneScape Dragonwilds

If you are wondering How To Make Bronze Armor RuneScape Dragonwilds, the process has three stages: mine, smelt and craft. The crafting itself happens at an armor bench once you have bars.

Some pieces also need extra materials such as leather and thread, so plan your hunting too.

Armor Pieces You Can Craft

Bronze gear includes several slots. According to the community wiki, available items include:

  • Bronze Helmet and Bronze Med Helm
  • Bronze Platebody
  • Bronze Platelegs
  • Bronze Shield

In addition, bronze swords, daggers and maces use the same bars, so weapons and armor compete for the same supply.

Crafting Order That Saves Resources

  1. Craft your weapon first, since it speeds up farming.
  2. Make the platebody next, because it gives the biggest defense jump.
  3. Add a helmet and legs once the bar supply recovers.
  4. Finish with a shield if you use one-handed weapons.

Moreover, the platebody is the most expensive piece, so smelt several batches before starting it.

Pro Tips: Bronze Progression

  • Batch your ore: Carry a large stack of copper and tin so one furnace visit produces many bars, which saves round trips.
  • Keep the ore ratio equal: The recipe uses the same amount of copper and tin, so mining unevenly leaves useless leftovers.
  • Place the furnace near your ore: Short trips reduce time spent exposed to enemies, and weight stays manageable.
  • Repair instead of replacing: Repairing gear costs far fewer bars than crafting new pieces, so keep spare bars in storage.

Is Bronze Worth It In Dragonwilds?

A stack of Bronze Bar Dragonwilds crafts is cheap, but it is where every build begins.

Bronze is cheap, fast and necessary, but it is not the end goal. Think of it as a stepping stone toward iron and beyond.

Indeed, the skills you train making bronze carry directly into later metals.

Bronze Vs Better Metals

  • Bronze: Easy to craft, good for the first dungeons and gathering.
  • Iron: Higher defense, but needs more setup and a stronger crafting level.
  • Later tiers: Require rarer ores and upgraded furnaces.

How Long Does Bronze Take?

Most players finish a full bronze set within their first sessions, depending on how quickly they find ore. Therefore, do not over-invest in it.

Upgrade the moment iron becomes practical.

Building A Base That Supports Smelting

A good base turns crafting from a chore into a routine. Place your furnace, bench and storage within a few steps of each other.

If you want ideas for protective layouts, the Minecraft survival house guide shows base principles that apply to almost any survival game.

Layout Checklist

  • Furnace in the open, with no roof above it
  • Storage chests beside the crafting benches
  • Walls or defenses covering your resource area
  • A clear path from your ore routes

Similarly, progression-heavy games reward planning. The V Rising progression guide explains how crafting, combat and base building connect in a comparable way.

Surviving The Ore Run

Ore routes are where early deaths happen. The Project Zomboid Muldraugh map guide is a good example of how scouting loot and safe routes keeps a survivor alive.

Apply the same thinking here: scout first, then commit.

Common Mistakes Bronze Players Make

  1. Building the furnace under a roof: It will not work properly. Fix: place it in an open area without any cover above.
  2. Mining only one ore type: You end up with unusable leftovers. Fix: mine copper and tin in equal amounts.
  3. Crafting everything at once: Bars run out before the platebody is done. Fix: prioritize weapon, then body armor.
  4. Ignoring weight: Heavy ore slows you down. Fix: smelt near the mine or drop extras at a storage chest.

How Does Lag Affect Crafting And Co-Op Play?

Dragonwilds supports online co-op, and the official Steam page for RuneScape: Dragonwilds lists it as both single-player and online co-op. In multiplayer, high ping can cause delayed ore hits, desynced stations and rubber-banding during fights.

Consequently, a stable connection matters even during quiet crafting sessions.

Signs Of A Bad Connection

  • Ore nodes that disappear after you mined them
  • Items that snap back into your inventory
  • Enemies that teleport or hit you late
  • Frequent disconnects from a friend’s world

Quick Fixes To Try

  1. Restart your router and use a wired connection.
  2. Close background downloads and streaming apps.
  3. Choose a host with a nearby location.
  4. Use a route optimizer to stabilize the path.

RuneScape Dragonwilds Bronze

Smoother Dragonwilds Sessions With ExitLag

ExitLag is a game connection optimizer, not a VPN. It tests multiple network routes in real time and picks the fastest, most stable one between you and the game server.

For a co-op survival game, that means fewer desyncs while you mine, smelt and fight together.

Features that help here include Multipath, which sends packets through several routes at once, and Traffic Shaper, which prioritizes game traffic over other apps. PC Boost also trims background processes for steadier FPS.

ExitLag does not modify game files or interact with anti-cheat systems. Just avoid running it alongside a VPN, since that reduces its effectiveness.

If lag is ruining your bronze runs, try the ExitLag Download and test your best route before your next session.

Final Thoughts On RuneScape Dragonwilds Bronze

Bronze is the first real milestone in the game, and it rewards a little planning. Mine evenly, build the furnace in the open and smelt in batches.

With that routine, RuneScape Dragonwilds Bronze gear becomes a quick step toward iron and stronger builds.

Quick Recap

  • Mine copper and tin in equal amounts for every Bronze Bar Dragonwilds batch
  • Smelt at a roofless furnace
  • Craft weapon first, then armor
  • Keep your connection stable for co-op

Next Steps

  1. Stock up on ore for several batches.
  2. Craft your full bronze set.
  3. Scout for iron and plan your next furnace upgrade.

All game images used in this blog post belong to Jagex Ltd. They are used for informational and educational purposes only and do not imply endorsement or affiliation with the rights holders.

Got questions or want to connect with other players? Join the conversation at the ExitLag Forum!

Guilherme Fabri

Guilherme Fabri

Guilherme Fabri, a Postgraduate in Marketing and Sales from USP, is the Organic and Affiliate Channels Manager & Partner at ExitLag. With over 15 years of experience. His passion for the gaming world goes beyond the professional realm. Guilherme is an avid enthusiast of esports titles such as EA Sports FC (FIFA) and NBA2K, FPS games like CS2 and Valorant, as well as racing simulators like Assetto Corsa and F1. This combination of expertise and passion for the industry is reflected in his contributions to the gaming community.

7380
1
Related Content

Continue Reading